Linksys EA9300 Router Setup

Linksys EA9300 router setup and trublshooting steps

Linksys EA9300 is a Max-stream AC4000 Tri-Band wireless Router. The brand new Linksys EA9300 router setup is easy and it does no longer require CD. It has smart Tri-Band for double the overall performance of a dual-Band Router. Three bands that supply the fastest blended wireless speeds to more gadgets. It really works on modern wi-fi-AC era for simultaneously streaming and gaming on more than one devices.

You may installation Linksys EA9300 router in 2 different ways:

First technique: installation Linksys EA9300 router manually.
The usage of net interface of the router, we are able to installation EA9300 manually by means of starting Linksys EA9300 router setup page and change the settings manually like other WRT collection older routers. And that i suppose this is quite simple manner.

Second method: putting in EA9300 router the use of the Smart Setup Wizard.
Putting in the Linksys smart wi-fi Router is made smooth using the smart Setup Wizard. It’s embedded in the firmware and is available even if the router does not have an internet connection or is in its default settings.

 

Linksys EA9300 router setup with out CD or manually.

Step 1: First make sure your modem is working. Connect your main PC without delay in modem. Ensure that your PC is capable of earning internally directly through the modem. If you are not able to access the Internet immediately through the modem, then contact your provider and first operate your modem. In the case of DSL connection, you may not be able to use the net directly through modem. In this situation you need the pppoe username and password from the DSL company. Make sure you have the appropriate pppoe user name and password. If you do not have a pppoe user name and password now, contact your Net Carrier Issuer and get it.

Step 2: Connect the pcs and modems to the Linksys EA9300 router with ethernet cable. Connect the modem to the Net port (which stands alone) and the computer for the ethernet port. If you connect the modem and the computer to the wrong port, you will not be able to open the Linksys router setup web page. If you have a computer connected to a WAN port, it will not communicate with the EA9300. Connection can be very important. You will see 4 lights, power, WAN, wireless and ethernet.

Linksys EA9300 router setup

Step 3: Open browser and in the bar type the number 192.168.1.1 . That is the default IP address of just about all of the models of Linksys Routers. But you can open the command prompt and take a look at the IP address in your laptop.

access-router

Input your Router Password then click Log in. The default password is admin. When you have modified it, input the new password instead. If the default password is not working then you could reset the device to the factory default. Press and keep the reset button for 10 seconds. Release the reset button and look ahead to 30 seconds. Power cycle the router.
You will see Linksys EA9300 router setup web page to your display screen.

Linksys-EA9300-router-setup

Step 4: Inside the left panel, you may see all the options required to Change the settings. Click on on “Connectivity” under router settings section.

Step 5: Click on On internet settings tab at the top.
Now according to your internet service provider, you can change the Internet settings.
Please take a look at the pictures below for appropriate internet provider issuer settings. There could be 2 forms of isps. Cable ISP and DSL ISP.

For Cable ISP , you want to clone the MAC address with of your pc, as indicates within the picture below. Then power cycle the network.

router-setup-for-Cable-Internet-service-provider
For DSL ISP, you want to go into the pppoe user name and password as shown within the picture below.
As soon as you change the net connections, you wired computer might be capable of access the net through the EA9300 .

router-setup-for-DSL-Internet-service-provider

Step 6: Change the wi-fi network Settings as shown inside the photo below.
As this is a dual band router, you’ll see 2 different wi-fi networks. SSID is the name of the wi-fi community. Change each ssids. Save the names of each the ssids special so you can identify them. Change the password for the wireless network. ( don’t forget this password ) . This will be the password of the wi-fi network and you’ll want this password / key when you may try and connect any wireless pc or tool to the network.

AC-router-wireless-network-settings

You can also create Guest network using this web base interface. In the left panel you will settings options. Now try to connect different computer or wireless devices to the network and see if that works. This was all about Linksys EA9300 router setup manually.

 

In case if you face any trouble, you may call our Linksys Support Number (800) 245-6042

Submit your review
1
2
3
4
5
Submit
     
Cancel

Create your own review

Help & Support Number (800) 245-6042
Average rating:  
 0 reviews

Related Posts